SAFETY DATA SHEET This safety data sheet was created pursuant to the requirements of: US OSHA Hazard Communication Standard (29 CFR 1910.1200) Revision Date 04-Jun-2024 Version 10 1. IDENTIFICATION Product identifier Product Name THREAD SEALANT W/PTFE 4 FL.OZ. Other means of identification Product Code 80632
56521 - HIGH PERFORMANCE THREAD SEALANT 50ML Revision Date 04-Jun-2024 Eye contact Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. If symptoms persist, call a physician.
SDS No.: 446301 V001.4 LOCTITE® 565™ PST® PIPE SEALANT THREAD SEALANT Page 2 of 8 Hazard statement(s): H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Precautionary Statement(s): Prevention: P261 Avoid breathing mist/vapours.
Product name: LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P Page 3 of 6 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed.
Product name: LOCTITE 567 THREAD SEALANT known as LOCTITE® 567™ PST® PIPE SEALAN Page 4 of 7 Engineering controls: Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits. Respiratory protection: Use a NIOSH approved supplied air respirator with an organic cartridge if the
IDH number: 88568 Product name: LOCTITE 592 MEDIUM STRENGTH THREAD SEALANT known as LOCTITE® 592™ PST® PIPE SEALAN Page 5 of 6 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Follow all local, state, federal and provincial …
SAFETY DATA SHEET 1. Identification Product identifier Hercules Megaloc Other means of identification Product code 7305E Synonyms Part Numbers: 15802, 15804, 15806, 15808, 15811, 15814, 15816, 15818, 15821 Recommended use Pipe thread sealant. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information
Mill-Rose Co. Blue Monster™ Pipe Thread Sealant Page 6 of 6 U.S. federal regulatory information: U.S. RCRA (40 CFR 261) This product is not a hazardous waste as defined under RCRA 40 CFR 261. State and community right-to-know regulations: The following component(s) of this material are identified on the regulatory lists below:
SAFETY DATA SHEET This safety data sheet was created pursuant to the requirements of: US OSHA Hazard Communication Standard (29 CFR 1910.1200) Revision Date 18-Jul-2024 Version 12 1. IDENTIFICATION Product identifier Product Name HIGH TEMPERATURE THREAD SEALANT 50ML Other means of identification Product Code 59235
Pipe Thread Sealant. None Known. Section 2. HAZARDS IDENTIFICATION. H226 - Flammable liquid and vapor. H302 – Harmful if swallowed. H319 – Causes serious eye irritation. H317 – May cause an allergic skin reaction. P210 – Keep away heat, sparks, open flames, and hot surfaces. No smoking. P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.