SPLIT+SLEEVE emergency bolt-on pipeline repair fitting - PLIDCO
PLIDCO Split+Sleeves are repair fittings that can be used to seal leaks caused by corrosion or damage on onshore and subsea. These are easy and safe to install, bolt-on fittings that stop the leak once the fitting is properly torqued. For a permanent repair, the fitting can be welded to the pipeline while it is under flow.
PENETRATION SLEEVES - I. RAUCH'S SONS INC.
Galvanized Split Sleeves are available in all diameters and heights. Available in 24, 22, 20 and 18 gauge steel. Ordering : Specify diameter, height, and figure number. Fig 4 Split Sleeve. Pipe Sleeves are cut from standard weight pipe ( Schedule …
Split Casing Pipe - Pittsburgh Pipe
Split casing or a split pipe sleeve for emergency repair, relocation, and expansion are all done by our skilled staff to provide the pipe fix you need as soon as possible. Pittsburgh Pipe has manufactured split steel casing pipe, also known as split steel conduit, for over 20 years.
Pipe Fit Repair Clamps | Pipeline Repair Clamps
Split sleeves are widely used for making repairs to a variety of high or low pressure pipelines. temperature pipelines, containing oil, water, gas, steam and chemical fluids. The clamp halves are joined by bolts to form a high integrity pressure vessel around the damaged or leaking pipe.
Flange Repair Split+Sleeve - PLIDCO
PLIDCO’s Flange Repair Split+Sleeve can fully encompass a flange set, stopping the leak by sealing on the pipe beyond the flange welds. Our solution has the ability to cover a wide variety of flange types and classes for both onshore and offshore applications.
Nishiyama | Split+Sleeve (Plidco Products)
The PLIDCO® Split+Sleeves are repair fittings that can be used to seal leaks caused by corrosion or damage on onshore and subsea pipelines. The PLIDCO® Split+Sleeves are easy and safe to install. The leak is sealed once the fitting is fully torqued on the line. For a permanent repair, the fitting can be welded to the pipeline while it is ...
Model #114 Mechanical Joint Split Repair Sleeve - JCM Industries
The JCM 114 MJ Split Repair Sleeve represents an unusually simple method of coupling or repairing straight runs of cracked or split cast iron pipe and severe longitudinal and circumferential breaks on critical service lines which can not be shut down. This product is made to order for all types and sizes of pipe. Resource Downloads. Brochure
- [PDF]
PLIDCO SPLIT+SLEEVE
PLIDCO® Split+Sleeves are repair fittings that can be used to seal leaks caused by corrosion or damage on onshore and subsea pipelines. PLIDCO® Split+Sleeves are easy and safe to install. The leak is sealed once the fitting is fully torqued on the line. For a
Split-Sleeve - NOTRON PIPELINE
Split-Sleeves are repair fittings that can be used to seal leaks caused by corrosion or damage on onshore and subsea pipelines. Split+Sleeves are easy and safe to install. The leak is sealed once the fitting is fully torqued on the line. For a permanent repair, the fitting can be welded to the pipeline while it is under flow.
Split Sleeve Clamps - Connector Subsea Solutions
MORGRIP® Split Sleeve Clamps provide a fast and effective way to repair a pipeline, while mitigating the need to cut out and replace the damaged section.