Harness Inspection Guidelines - Occupational Safety and Health ...
Every harness must have a legible tag identifying the harness, model, date of manufacture, name of manufacturer, limitations and warnings. Iftagging system is missing or not legible remove …
FULL-BODY HARNESSES INSPECTION CHECKLIST Inspection Result ( ) INSPECTION POINTS PASS FAIL 1) Inspect the load indicator warning (located on webbing below dorsal D-Ring pad) to see if any part of it is showing. 2) Inspect hardware for cracks, sharp edges, deformation, corrosion, rust, or other signs of wear or damage.
Check the straps for any damage or distortion, especially UV, chemical damage or if the harness appears brittle. For example, checking the colour is a good indicator of whether or not a harness has been affected by too much sun. In addition, the texture of the webbing straps can also reveal if they have been damaged by chemicals as
inspected by: inspection date: model number: serial number: manufacture date: date of 1st use: overall disposition: r accepted - proceed with use r rejected - must remove from service full-body harness www.safekeepersafety.com | 800-743-2544 inspection checklist elevate your safety webbing hardware damage shoulder straps chest & back straps ...
Inspect the Full Body Harness before each use according to this inspection checklist. If the harness fails any point on the inspection checklist, remove the harness from service.
FULL BODY HARNESS INSPECTION CHECKLIST . Harnesses must be inspected by a competent person every twelve months. Space has been provided to record the dates of the inspections on the harness label and in the user instruction manual. Prior to each use the user must visually inspect the harness for
Harness Inspection Checklist Identification Number: Date of Harness: Component Part Possible Defects Current Condition Pass or Fail? Webbing Cuts Punctures Abrasions Burns Discolor Stitching Incomplete Pulled Distorted Buckles and Attachment Points …
Hardware: Includes D rings, buckles, keepers, and back pads. Inspect for damage, distortion, sharp edges, burrs, cracks and corrosion. Webbing: Inspect for cuts, burns, tears, abrasions, frays, excessive soiling, and discoloration. Labels: Inspect, making certain all labels are securely held in place and are legible.
2024年1月1日 · MSA requires that all harnesses be inspected by a competent person other than the user at intervals of no more than six months per applicable standard or as specified by a formal fall protection program.
OSH Safety Harness Inspection Checklist | PDF - Scribd
This safety harness inspection checklist provides inspectors with over 30 criteria to evaluate potential faults across the webbing, stitching, fiber rope, metal parts, and plastic parts of safety harnesses.
- 某些结果已被删除