在新选项卡中打开链接
  1. Chapter 4: Ramps and Curb Ramps - United States Access Board

    • [§303.4] Ramps and curb ramps are required along accessible routes to spanchanges in level greater than ½”. Elevators and, under certain specifiedconditions, platform lifts, can be used as an a… 展开

    Slope and Cross Slope

    [§405.2] Slope represents the proportion of vertical rise to horizontal lengthand is specified in the Standards as a ratio (e.g., 1:12). It also canbe expressed as a percentage, pitc… 展开

    U.S. Access Board
    Clear Width

    [§405.5] Ramp runs must have a clear width of 36″ minimum (measured betweenhandrails where provided). The width of ramps that are part of a meansof egress may furth… 展开

    U.S. Access Board
    Rise

    [§405.6] The height of runs is limited (30″ maximum), but there is no limit on thenumber of runs a ramp may have. Long ramps with many runs can bestrenuous for people using ma… 展开

    U.S. Access Board
     
  1. ADA Standards for Accessible Design

    The ADA Standards for Accessible Design—along with the Title II and Title III regulations—say what is required for a building or facility to be physically accessible to people with disabilities.

  2. Chapter 4: Accessible Routes - United States Access Board

  3. ADA Resources | FHWA - Federal Highway Administration

  4. ADA Ramp - ADA Compliance - ADA Compliance

    Curb ramps and ramps to be constructed on existing sites or in existing buildings or facilities may have slopes and rises as allowed in 4.1.6(3)(a) if space limitations prohibit the use of a 1:12 slope or less.

  5. Curb Ramps and Pedestrian Crossings Under Title II of …

    To allow people with disabilities to cross streets safely, state and local governments must provide curb ramps at pedestrian crossings and at public transportation stops where walkways intersect a curb. To comply with ADA

  6. 2010 ADA Standards for Accessible Design