Cable Tray Supports & Clamps - MP Husky
These special heavy duty tray hold down cable tray clamps and expansion guides are ideal for fastening tray to C-Channels and beams, such as those found on bridges. They are easy to install and reduce field labor costs since the beam clamp set screws eliminates the need to …
30 Pack Hold Down Clamp, Ground/Stand-Off Joint Plate, Wire Mesh Cable ...
2024年1月23日 · Application in 4.0-6.0mm Dia wire mesh cable tray / basket cable tray. Thickness 1.2mm, Slot hole size: 31.5 x 8mm, fit with 1/4" bolt. For fastening mesh cable trays on the ground or on stand-off brackets. Packing list, 30 pcs hold down clamps. Brief content visible, double tap to read full content.
- 评论数: 2
Z-Hold Down Clamp/Expansion Guide | Ladder Trays | Cable Tray …
2024年9月16日 · Cablofil's 1893 hold down clamp may be installed on the inside or outside flanges. The clamp profile is shallower than the cable tray rungs so there is no interference when pulling cable. If the tray type is solid bottom than the hold down clamps must be installed on the outside flanges since there will be no access to the inside flanges.
Cable Tray Hold-Down Clamp, Hot-Dip Galvanized - Rexel USA
Cable Tray Hold-Down Clamp, Hot-Dip Galvanized, 1/8" Maximum Flange Thickness, Cat #: 9G-1249HD, Mfr: Eaton B-Line
I-BEAM Ladder Hold-Down/Expansion Clamp [HDH-A] - Atkore
Choosing US Tray ladder cable tray solutions can reduce labor time and minimize project costs. Locks on outside flange of tray side rails, preventing movement in all directions Functions as Hold Down Clamp and Expansion Guide
Hold Down Clamps - TechLine Mfg
Hold down clamps are used to anchor Snap Trap or other cable tray to a structural element. They are typically installed when the physical structure prevents or makes it difficult to use the hole pattern of the cable tray. Installation Guide: When installing Hold Down Clamps, two (2) clamps should be used and attached to each side rail.
Cable Tray Nut, Bolt, & Clamp Assemblies :: Rexel USA
Cable Tray Ground Clamp, Range: 2/0 AWG to 250 MCM, Tin Plated, Material: Copper Alloy Body, Bolt Size: 3/8 Inch x 16.
Cable Tray Hold-Down Clamp - 809NR4|DS-HDC/10 - Grainger
These cable clips attach directly to steel beams, joists, or rails without mounting hardware, allowing for quick repositioning and removal. Cables, cable bundles, or cable ladder trays slide into the clip and secure in place.
Fiberglass Cable Tray Combination Hold-Down Clamp
Hold-Down side secures and prevents lateral movement of cable tray while expansion side allows for thermal expansion and contraction of cable tray.
Cable Tray Fitting, Hold Down Clamp, Aluminum, Hold-Down ... - Graybar
Shop Cable Tray Fitting, Hold Down Clamp, Aluminum, Hold-Down Clamp, 1/4 (Hardware) In By B-Line (Eaton) (9A-1246) At Graybar, Your Trusted Resource For Cable Tray Fittings And Other B-Line (Eaton) Products.
- 某些结果已被删除