spraying sher-wood cab lacquer - FineWoodworking
2009年8月30日 · I almost exclusively use the Sher-Wood lacquer. I spray outside under a tent in all sorts of temperature and humidity levels. I live on the Gulf coast. Under these conditions, I found the best results with a 10% to 15% dilution with lacquer thinner and …
Sherwin Williams Shurwood precat lacquer - Family Woodworking
2012年2月12日 · Dave, From the Sherwin Williams web site: SHER-WOOD® Hi-Bild Pre-Cat Lacquer SHER-WOOD® Hi-Bild PreCat Lacquer is a fast drying, high performance, higher solids precatalyzed lacquer for the kitchen and bath cabinetry and the general wood finishing market. After catalyzation, it provides 4 months pot life as a PreCat lacquer,.
precat Lacquer, shelf life? | Family Woodworking
2013年1月9日 · "SHER-WOOD® Hi-Bild PreCat Lacquer is a fast drying, high performance, higher solids precatalyzed lacquer for the kitchen and bath cabinetry and the general wood finishing market. After catalyzation, it provides 4 months pot life as a PreCat lacquer."
finishing pecan table top - FineWoodworking
2006年10月8日 · Staining has nothing to do with a smooth finish. All it does is color the wood. After the wax is removed, a light sanding with 600 grit paper should be sufficient to smooth the surface. Follow this with a light rubbing with a grey scotch pad. Clean all the dust off and you can proceed with the wipe on finish.
is pre-cat lacquer that much better? - FineWoodworking
2003年5月14日 · The test pieces i’ve done were done with a gloss deft brushing lacquer and turned out well. I plan to spray on the lacquer for the actual cabinets. Being kitchen cabs I would like them to be reasonably tough and water resistant. my questions are: 1. Is a pre-cat lacquer worth the extra cost and how difficult is it to find. (san diego)
Nitrocellulos Lacquer vs CAB - FineWoodworking
2006年6月23日 · MG used the wood frame until the end of the TF. The A was the first monococque body and the last real sports car built (real sports cars don't have wind up windows) My first serious 3d wood project was a new frame for my 1954 MGTF. I would like to do another having thought about economic production for a few years.
Filler for Khaya Mahogany - FineWoodworking
2009年8月10日 · Sherwin Williams Sher-Wood filler shows 73% of the weight as quartz (CAS14808-60-7, the same as the crystalline silica reported by Behlen) The only other reported ingredient was mineral spirits, for 13% of the weight.
Lacquer Sheens - FineWoodworking
2008年11月8日 · Add a little bit of flattener (maybe two ounces) and spray a sample board that is sanded and stained like the item you'll be finishing. Wait until it has a chance to dry for an hour or so and see what you have. Keep in mind that the finish will always look a little glossier until it has a chance to dry overnight.
Translucent finish - FineWoodworking
2005年8月17日 · "Sher-Wood HOMOCLAD Sealer is a tough, moisture resistant, synthetic sealer..." "Advantages: Deep penetration into wood pores. Imparts dimensional stability by filling the air voids in wood. Better moisture resistance, toughness and adhesion than lacquer sealers. Resists rot by restoring synthetic resin replacing sap to open pores.
Is There a Waterborne Finish as Nice as Solvent-Based Lacquer?
A: No. In 30 years of finishing and refinishing wood, I’ve never seen one and probably never will. Water-based finishes just don’t penetrate and envelop the cellular structure of the wood as well as solvent-based finishes, and that’s why they don’t have the same luster and depth. However, there are still some very good-looking water ...