"Metal-oxide-semiconductor field-effect transistors (MOSFETs), form the backbone of modern computing through complementary metal-oxide-semiconductor (CMOS) technology," said Das. "However ...

The SparkFun MOSFET Power Switch and Buck Regulator (Low-Side) combines two circuits into one board: an LMR14203 buck regulator configured to output 3.3V and an N-channel MOSFET (PSMN7R0-100BS) ...

Abstract: Threshold voltage characteristics are presented for a double boron-ion-implanted n-channel enhancement MOSFET device for high speed logic circuit applications. A 15-Ω-cm high resistivity ...

On the output are two-output terminal blocks, with one block connected to power and the other switched to ground when the signal level is high. In between is an AO3406 N-Channel MOSFET rated for 30Vds ...

As mentioned, the secondary side MOSFETs are SQM10250E_GE3 (250V). I noticed that in your schematic, you do not have a P-channel MOSFET since you only use the IPB039N10N3G (N-channel MOSFET) on the ...

BJTs are controlled by current, while FETs are controlled by voltage. Within these categories, there are further subdivisions such as NPN and PNP BJTs and N-Channel and P-Channel MOSFETs. MOSFET ...

Using N-Channel MOSFETs to switch AC, sensing temperature changes with signal diodes, and even replacing a 555 with a blinking LED are just a few of the hacks covered in the video below the break.

Abstract: The partially depleted (PD) n‐channel silicon‐on‐insulator metal oxide semiconductor field‐effect transistor (SOI MOSFET) has a quasineutral region in the silicon‐on‐insulator (SOI) layer.

A diagram of an n-channel JFET. As the negative gate voltage ... by a depletion region in a JFET or by an insulating layer in a MOSFET. A FET is a voltage amplifier rather than a current amplifier ...