Ethernet isn’t very interesting if all you can do is receive. Transmitting packets is needed, too. The IP stack will be able to build a frame with the MAC addresses and payload, but we’ll have ...

The IP layer 3 breaks apart the data being transmitted into variable length packets, known as "Ethernet frames," up to 1,500 bytes long. Each frame has a header containing source and destination ...

Some sniffers work only with TCP/IP packets, but the more sophisticated tools work with many other network protocols and at ...

The L2 Ethernet Switching IP features a processor interface allowing setup of tables and register. It also features a packet based CPU port which can be used to both send and receive ethernet frames ...

Using this option, you can create a filter to control which packets are reported based on Ethernet Frame, IP header, TCP header, and Encapsulation. If you run the program mentioned below ...

While a single Ethernet port can support multiple IP addresses and TCP sessions and can be secured with MACsec on the port operating on a frame-by-frame basis in real-time, IPsec and TLS must encrypt ...

Most LAN traffic is IP based; therefore the bulk of all Carrier Ethernet traffic is IP packets. Since MPLS is ... is designed to transport Ethernet frames natively (layer 2 in the OSI model ...

[danman] listened in to the packets being set with Wireshark. The basic protocol was easy enough to grok, but thanks to the Chinese engineers and an IP header that was the wrong length ...

Multi Stream UDP/TCP Traffic Generator and Analyzer is a hardware-based Ethernet tester capable of generating multi-stream Ethernet traffic of varying packet length and also analyze the loopback ...